External Splines: Capabilities
•External Spline Pitch Diameters: 1/8″ to 100″
•Number of teeth: 4 teeth to 400 teeth
•Face Width: 56″ maximum face width
•Pitch Types: Diametral Combination Pitch (SAE/ ANSI Standard), Metric Splines (DIN 5480/ DIN 5482), Module Splines, Full Fillet splines, Flat Root splines, Major Diameter Fit splines, SAE Involute Serrations, Straight Sided splines, SAE 6 spline, SAE 10 spline, Metric Straight Sided splines.
(Other less common pitch cutters can be rented or purchased as needed).
•Tooth size: 120 Diametrial Pitch to 1 Diametral Pitch, .2 Module to 25 Module.
•Pressure Angle: 30° PA is the most common pressure angle for spline tools that we stock.
We also stock some 37.5° and 45° cutters.
(Other less common, pressure angle gear tools are available to rent or purchase as needed.)
Materials: steels, hardened steels, pre-heattreat steels, stainless steels, cast iron, aluminums, delrin (aceytl), nylon, uhmw and other plastics, non-metallics (phenolics), brass and bronzes, graphite, titanium, monel, inconel. We can and have made external splines out of many other materials as well.
For easy to understand technical information about External Splines click on the Technical Section tab from our home page.
Send us your gear samples or machine parts (new or worn) for our complete reverse engineering service.
Depending upon the complexity of your samples, in many cases, there is no charge for reverse engineering.