Face Gears Capabilities:
•Pitch Diameters: 1/2″ to 15″
•Number of teeth: 4 teeth to 100 teeth
•Pitch Types: Diametral Pitch, Module Pitch, Circular Pitch, Agma Stub, and others.
··(Other less common pitch cutters can be rented or purchased as needed).
•Tooth size: 48 Diametrial Pitch to 2 Diametral Pitch, .5 Module to 12 Module, .06″ Circular Pitch to 1.5″ Circular Pitch.
•Pressure Angle: 14.5° PA, 20° PA, 25° PA, are the most common pressure angle gear tools that we stock.
··(Other less common, pressure angle gear tools are available to rent or purchase as needed.)
Materials: steels, hardened steels, pre-heattreat steels, stainless steels, cast iron, aluminums, delrin (aceytl), nylon, uhmw and other plastics, non-metallics (phenolics), brass and bronzes, graphite, titanium, monel, inconel. We can and have face gears out of many other materials as well.
For easy to understand technical information about face gears… click on the Technical Section tab from our home page.
Send us your gear samples or machine parts (new or worn) for our complete reverse engineering service.
Depending upon the complexity of your samples, in many cases, there is no charge for reverse engineering.